ICY DOCK is a leading manufacturer of removable hard drive enclosures. Since our company has always been about the customers, we wanted to create an informal avenue for us to communicate with you! Hopefully, these blogs will provide you with insights and opinions about ICY DOCK products.
Introducing the MB882HX-1SB 2.5" SATA SSD Xpander Hybrid Adapter. Using a high speed 2.5" SATA SSD and a high capacity 3.5" SATA hard drive, you can combine them to create a new breed of species.
Using our hybrid technology, we can take a moderate or 2nd generation 2.5" SATA SSD in combination with a mid to higher end 3.5" SATA hard drive which automatically creates "hybrid partition" and "storage partition". The "hybrid partition" doubles the capacity of the SSD drive and provides high performance in transfer rates. The storage partition gives you the remaining capacity of the hard drive* (the size of the 3.5" SATA hard drive minus "hybrid partition" size).
This is the perfect upgrade solution without purchasing an expensive high capacity SSD. The Xpander Hybrid Adapter doubles the sequential transfer rates of the hard drive exclusively in the hybrid partition, it is great for people who move, play or edit large media files. Such as a video editor, graphic designer, HD movie enthusiast that use applications like Adobe Photoshop, Sony Vegas and Windows Media Center that require large file loads / transfers. For editing, you can use the hybrid portion as a sketch drive; move the working files to it for fast editing. When you are done with the file we recommend moving the file to a RAID protected archive drive. The "storage partition" is perfect for non-important applications or files i.e. games, movies, music, or other media files.
Recommendations:
1. When using the Xpander Hybrid Adapter if either the SSD or the hard drive fails, all data will be lost on both drives. We recommend that you always save your important data to a RAID protected archive drive.
2. For best results, we recommend using an inexpensive 2nd generation SATA II 2.5" SSD (roughly 250MB/sec in read/write speed) with a good performance 7200RPM 3.5" SATA II hard drive (roughly 130MB/sec in read/write speed).
Features:
* Create a high performance "hybrid partition" that doubles the capacity of the SSD drive been used.
* Create a "storage partition" which gives you the remaining capacity of the hard drive minus "hybrid partition" size.
* Increase the hard drive transfer rate by up to 2X for both sequential read/write speeds **
* Perfect for Media related applications.
* Airflow vents for heat dissipation.
* Screw-less design for quick & easy SSD installation.
* Universal mounting holes for most common PC case.
* The adapter is the same as a 3.5" hard drive in dimension and compatible with most common PC cases.
**Note: Performance dominantly dependent on selection of SSD and hard drive.
Backing up and keeping your data safe and protected is important, no matter if it is for personal or business purposes. Using hardware RAID for backing up is the most efficiency and reliable backup solution. Today, we will talk about how to efficiently back up your OS and important data with the MB982SPR-2S for your personal or business computer.
Many people do not realize how important it is to back up their OS drive. They think it is easy to reinstall the OS and applications. Well, it is not hard, but can be very time-consuming to start over from scratch. For example, the Windows updates alone can take hours and require several restarts, and then you have to deal with the drivers. Installing drivers can be tricky, sometimes you cannot find drivers for out of date cards, or sometimes you just forgot the model number of the hardware you have, it could be a pain if there are a lot of missing drivers. Reinstalling the programs is piece of cake, but you may spend most of your time on finding CDs and serial numbers. After that is all done, you need to setup all of the lost settings for your OS, programs, and email server.
There is a lot of work that needs to be done when replacing a failed hard drive. Besides all of the work that needs to be done think about how much revenue has been lost due to the time spent fixing the computer. This can all be a very time and money exhausting experience.
Using the MB982SPR-2S is a safety net that can be put in place to keep your personal or business operation running smooth and efficient. When a drive goes out it can easily be replaced, the enclosure automatically mirrors the new drive. It is a quick and easy fix compared to the traditional way of replacing a failed drive. The MB982SPR-2S is a great way to have the protection you want on your personal workstation or valuable company computers. It is fast easy and a standalone solution to backing up your precious data including OS, applications, documents, emails, photos and all the personalized settings. The time and money that can be saved by using the MB982SPR-2S is more than you think. The MB982SPR-2S is a very small investment that can save you and your business a great deal of money. The MB982SPR-2S converts two 2.5” SATA HDD into a single 3.5” SATA hard drive with built-in RAID function (RAID 0, 1, BIG & Port multiplier). Since the MB982SPR-2S is identical to a 3.5” SATA hard drive you can directly replace your current 3.5” SATA hard drive in your system without adding a controller card or modifying the case. This is extremely useful for systems that have capacity limitations, slot limitations or specification limitations. No matter if you have a 5 years old Dell system, all in one slim system or any non-expandable system; as long as it uses a 3.5” SATA hard drive and you are able to replace it with the MB982SPR-2S.
If you would like to take your backup with you or would like to have the drive removable, then the MB877SK-B is the perfect pairing with the MB982SPR-2S. The MB877SK-B uses one 5.25” bay and allows you to remove and replace a drive. The MB982SPR-2S easily and securely with its tray-less design with security key lock. With this solution you can take your backup disk with you. If you need to keep your computers information secure and safe than taking your computers hard drive with you is the best way to protect yourself. You can also lock the door so no one can take your MB982SPR-2S from your computer. The MB877SK-B allows you to quickly remove your hard drive from your computer externally. If you have a MB877SK-B at work and at home, you can bring your MB982SPR-2S home and insert it into your home computer. This way you can have a portable OS which allows you to continue your work at home. If one of the 2.5” drive failed, simply remove the MB982SPR-2S from the MB877SK-B and replace the drive with no tools involved.
For initial Hardware RAID setup method, if you use brand new 2.5” SATA drives you can insert the drives into the MB982SPR-2S and continue with the RAID setup. If you are using “used” or “existing drives” from your system, it is recommended to completely erase the drives first. For Windows user, you can use Windows Diskpart commend to clean the drive. Steps to complete a deep cleaning are here:
To setup your RAID enclosure using the hardware method follow the video below for a demonstration:
If you have access to a PC or Mac you can always setup your RAID enclosure using the software method which is recommended for its simplicity. The link for the software can be found here:
ICY DOCK has teamed up with Wegotserved.com to offer our loyal customers an opportunity to win a brand-new MB982SPR-2S, the most unique 2.5" to 3.5" HDD/SSD RAID Converter.
This competition is open to one and all. All you have to do is submit a picture. Just one picture of your "Windows Home Server system". We are looking for the coolest setup submitted, whether that be a case mod; the system installation (in your closet? or in your rack?); the most drives (or most terabytes); the quietest system or the jet engine system. Perhaps you have a system with 24 MB982SPR-2S modules populated with 48 SSDs? If you do, you already have my vote as the most expensive setup out there!
To put it more bluntly: we are looking for Cool and Unique. So, in order to enter the contest in the forum thread, we need:
· a picture of your computer/system
· a paragraph explaining what makes it special
This is your chance to show off *your* system.
How to submit entries for contest:
You must login and register HERE on the Wegotserved forums and post your submission to THIS THREAD by July 31st @ 10PM Central Daylight Time. WGS will then pick *three* winners from those submissions.
Icy Dock has been the leader of quality made 2.5" to 3.5" SATA SSD & HDD Converter. We offer a line of converters that feature a full metal construction to hold up to any application. With a full metal converter you never have to worry about your SSD or HDD being damaged. Our full metal converters feature: Airflow Vents for Heat Dissipation with Anti-vibration Design, Universal Mounting Holes for Most Common PC Cases, Screw-less Design for Quick & Easy, Compatible with 15mm height drives. The MB982SPR-2S is a unique converter with built in RAID, featuring RAID 0, RAID 1, BIG, and Port Multiplier.
Our converters can be used where ever a 3.5" drive can be used. Since our converters have the same form factor as a standard 3.5" drive, you can use them in a hot-swap bay, Mac Pro, Server, Backplane, or any application a 3.5" drive would go. If you are a Mac Pro user our converters are perfect for upgrading your system to a SSD. Being full metal the drive will be fully protected, great for industrial use where protection is a must. Our converter line is excellent for System Integrators and IT Professionals that strive to use the best products.
We offer 3 models that feature a full metal construction: MB982SP-1S, MB982IP-1S, and MB982SPR-2S.
* Converts a 2.5" SATA Hard drive / SSD to a 3.5" SATA hard drive.
* Full Metal and Heavy Duty with Easy Access to Drives.
* Airflow Vents for Heat Dissipation with Anti-vibration Design.
* Universal Mounting Holes for Most Common PC Cases.
* Compatible with Most 3.5" HDD Backplanes and Hot Swap Devices.
* Compatible with Mac Pro.
* Screw-less Design For Quick & Easy Installation.
* Compatible with 15mm height drives.
* Converts a 2.5" SAS & SATA hard drive / SSD to a 3.5" SAS / SATA hard drive.
* Full Metal and Heavy Duty with Easy Access to Drives.
* Airflow Vents for Heat Dissipation with Anti-vibration Design.
* Universal Mounting Holes for Most Common PC Cases.
* Compatible with Most 3.5" HDD Backplanes and Hot Swap Devices.
* Compatible with Mac Pro.
* Screw-less Design For Quick & Easy Installation.
* Compatible with 15mm height drives.
* Full Metal and Heavy Duty with Easy Access to Drives.
* Screw-less and Tool-less Design Saves Tons of Time For Installation and Maintenance.
* Built in RAID featuring RAID 0, RAID 1, BIG, and Port Multiplier.
* Blue Status LEDs on Release Latch.
* Airflow Vents For Heat Dissipation With Anti-vibration Design.
* Universal Mounting Holes For Most Common PC Cases.
* Windows and Mac Software for RAID Set Up.
* Compatible With Most 3.5" HDD Backplanes and Hot Swap Devices.
* Screw-less Design For Quick & Easy Installation.
Icy Dock is proud to introduce a brand new item to its innovative product line, the MB981U3-1SA 2.5"/3.5" SATA & IDE Hard Drive Docking Station with SuperSpeed USB 3.0 interface. This product is packed with features and gives the term docking station a whole new meaning.
The first feature of the device is a direct connection through the top slot for 2.5" and 3.5" SATA hard disk and solid state drives, allowing a user to access their drive via SuperSpeed USB 3.0. 2.5" drives can be used on the go being powered by the USB bus, while 3.5" drives utilize a small form factor wall power supply that can be easily stowed away in a laptop bag or briefcase. The anti-dust cover on the top is divided into 2 pieces, so that if a 2.5" drive is inserted, only the smaller portion of the cover opens up, leaving the electronics inside safe from dust and debris.
The second feature of the MB981U3-1SA is the detachable adapter that releases from the bottom of the dock via 2 small lockable switches. Once the adapter is removed, IDE drives can then be used, as well as both types of SATA drives. 3.5" IDE drives connect to the labeled input, and is powered using the 4-pin power jumper cable. 2.5" IDE drives connect to the labeled input, and can be powered using only USB power. Using SATA drives with the disconnected adapter is the same as when they are directly docked through the top slot.
Other useful elements include power buttons on the dock and adapter that double as status LEDs, a easy to press, large drive eject button, and as always, a standard 3 year warranty.
Product Feature:
* Completely screw-less / tool-less design for any type of drive.
* Allows docking of 2.5"/3.5" SATA HDD & SSD connected via USB 3.0
* Connects 2.5"/3.5" IDE HDD connected via USB 3.0 using the removable adapter.
* Able to run 2.5"/3.5" IDE & SATA hard drive Simultaneously.
* 2 part anti-dust cover protects internals even when small 2.5" SATA drive is used.
* 2 locking switches hold the detachable adapter in place when used as a dock.
* Easy access On/off button allows hard drive life expendability and energy conservation.
* Plug & Play USB 3.0 with backwards capabilities to USB 2.0 for quick connection
for any computer system.
* Exposed working HDD stands in the air vertically for fast heat radiation.
* USB 3.0 connectivity with up to 5 Gb/sec transfer rates.
* Large eject button for hassle free drive removal.
* Included 4-pin power jumper cabled provided for use with 3.5" IDE drive.
* Built in compartment to hold 4-pin jumper.
* Low profile power adapter for 3.5" drives.
* USB bus power for 2.5" drives.
* Great for DIY users and IT Professionals.
* Designed for PC & Mac systems.
